Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
The car's computer thinks the brake pedal isn't working right because the sensor that tells it where the pedal is might be broken or not connected properly.
This code indicates that the brake pedal position sensor is sending a signal that is too high, which could mean a problem with the sensor or its circuit.
The Brake Pedal Position (BPP) sensor is responsible for informing the vehicle's control modules about the position of the brake pedal. A 'Circuit High' code suggests that the sensor is reporting a voltage signal higher than expected, which could be due to a wiring issue, a faulty sensor, or a problem with the control module.
• Brake warning light illuminated
• Unresponsive brake lights
• Inconsistent brake pedal feel
• Faulty brake pedal position sensor
• Damaged or corroded wiring or connectors
• Faulty control module
Brake Pedal Position Sensor: A sensor that detects the position of the brake pedal and sends this information to the vehicle's control modules.
OBD-II: On-Board Diagnostics II, a standardized system in vehicles for self-diagnostics and reporting.
• Inspect the brake pedal position sensor and wiring for damage.
• Check the sensor's voltage output with a multimeter.
• Test the continuity of the wiring to the control module.
• Replace the brake pedal position sensor if faulty.
• Repair or replace damaged wiring or connectors.
• Reprogram or replace the control module if necessary.
• Multimeter
• OBD-II scanner
• Screwdriver set
$100 - $300
Moderate
• Ford F-150
• Chevrolet Silverado
• Dodge Ram 1500
• Regularly inspect brake system components.
• Ensure connectors and wiring are free from corrosion.
• Perform routine maintenance checks.
Sensor Issue
• Do not ignore the brake warning light.
• Have the vehicle inspected by a professional if unsure.
• Avoid driving the vehicle if brake performance is compromised.
Check with the vehicle manufacturer for warranty coverage on brake system components.
This code has been associated with issues in vehicles with electronic brake systems, particularly in models with advanced braking technologies.
High – Brake system issues can affect vehicle safety and should be addressed immediately.
Driving with a malfunctioning brake system can lead to accidents. It is important to address any brake-related issues promptly.
• Vehicle ignition in the ON position
• Brake pedal pressed
The brake pedal position sensor is typically located near the brake pedal assembly, often mounted on the pedal arm or nearby bracket.
Q: Can I drive with a C1063 code?
A: It's not recommended to drive with this code active, as it may indicate a problem with the brake system that could affect safety.
Q: How do I reset the C1063 code?
A: After addressing the issue, you can use an OBD-II scanner to clear the code. However, ensure the problem is fixed first.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.