Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
The car's computer is having trouble talking to a sensor that helps it understand how hard you're pressing the brake pedal.
This code indicates an issue with the electrical signal from the brake system simulator pressure sensor.
The C1050 code is triggered when the brake system simulator pressure sensor sends an abnormal signal to the vehicle's electronic control unit (ECU). This sensor is responsible for detecting the pressure applied to the brake system, and an electrical fault may prevent accurate readings.
• Brake warning light on
• Inconsistent brake pedal feel
• Reduced braking performance
• Faulty brake system simulator pressure sensor
• Damaged wiring or connectors
• Malfunctioning ECU
ECU: Electronic Control Unit, the computer that controls various functions in a vehicle.
OBD-II: On-Board Diagnostics, a standardized system for self-diagnostics and reporting in vehicles.
• Check for any additional codes and clear them.
• Inspect the brake system simulator pressure sensor and its wiring.
• Test the sensor's electrical signals with a multimeter.
• Replace the brake system simulator pressure sensor.
• Repair or replace damaged wiring or connectors.
• Reprogram or replace the ECU if necessary.
• OBD-II scanner
• Multimeter
• Basic hand tools
$150 - $400
Moderate
• Nissan Altima
• Infiniti Q50
• Nissan Rogue
• Regularly inspect brake system wiring.
• Ensure sensors are clean and properly connected.
• Perform routine brake system maintenance.
Sensor Issue
• Do not ignore the brake warning light.
• Have the vehicle inspected by a professional if you notice braking issues.
Check with the vehicle manufacturer for warranty coverage on brake system components.
This code has been reported in vehicles with electronic brake systems, particularly in models with advanced driver-assistance systems.
High – Braking is critical for vehicle safety, and issues should be addressed promptly.
Driving with a malfunctioning brake system can be dangerous and may violate vehicle safety laws.
• Vehicle must be stationary.
• Ignition in the ON position.
The brake system simulator pressure sensor is typically located near the brake master cylinder or integrated into the brake pedal assembly.
Q: Can I drive with a C1050 code?
A: It's not recommended to drive with a C1050 code as it may affect braking performance.
Q: How do I reset the C1050 code?
A: After repairs, use an OBD-II scanner to clear the code, but ensure the issue is resolved first.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.