Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer is getting a low signal from the sensor that checks the pressure in the brakes. It's like the sensor isn't telling the computer the right information about how hard you're pressing the brakes.
The brake pressure sensor monitors the pressure within the braking system. A 'circuit low' code indicates that the sensor is sending a signal that is lower than expected, which could mean a problem with the sensor or its wiring.
The C063F code is triggered when the brake pressure sensor 'J' circuit sends a voltage signal to the Engine Control Module (ECM) that is below the specified range. This could be due to a fault in the sensor, wiring issues, or a problem with the ECM itself.
• ABS warning light on
• Brake system warning light on
• Reduced braking performance
• Faulty brake pressure sensor
• Damaged wiring or connectors in the sensor circuit
• Faulty Engine Control Module (ECM)
ECM: Engine Control Module, the computer that controls the engine and other systems in the vehicle.
ABS: Anti-lock Braking System, a safety system that prevents the wheels from locking up during braking.
• Check for any additional trouble codes.
• Inspect the brake pressure sensor and its wiring for damage.
• Test the sensor's voltage output and compare it to specifications.
• Replace the faulty brake pressure sensor.
• Repair or replace damaged wiring or connectors.
• Reprogram or replace the ECM if necessary.
• OBD-II scanner
• Multimeter
• Wiring diagram for the vehicle
$150 - $400
Moderate
• Chevrolet Silverado
• GMC Sierra
• Cadillac Escalade
• Regularly inspect brake system components.
• Ensure proper maintenance of the vehicle's electrical system.
• Avoid exposure of sensors to extreme conditions.
Sensor Issue
• Do not ignore the warning lights on the dashboard.
• Have your vehicle inspected by a professional if you notice any braking issues.
• Regular maintenance can prevent sensor failures.
Check with the vehicle manufacturer. Sensors may be covered under powertrain or emissions warranty.
This code has been reported in vehicles with electronic brake control systems, especially in models with high mileage.
High – Brake system issues can affect vehicle safety and should be addressed promptly.
Driving with a malfunctioning brake system can lead to accidents. Ensure all repairs are performed by a qualified technician.
• Vehicle is stationary.
• Brake pedal is pressed.
The brake pressure sensor is typically located near the master cylinder or integrated into the ABS module.
Q: Can I drive with the C063F code?
A: It's not recommended to drive with this code active, as it may indicate a problem with the brake system.
Q: How do I reset the C063F code?
A: After repairs, use an OBD-II scanner to clear the code. If the issue is fixed, the code should not return.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.