Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer thinks there's something wrong with the sensor that checks how hard you're pressing the brake pedal. It's like when a video game controller button isn't working right.
The brake pressure sensor is responsible for measuring the pressure applied to the brake system. If the sensor reads outside the expected range, it triggers this code.
The C063C code indicates a problem with the brake pressure sensor, specifically that the sensor is reading a pressure value that is outside the expected range or performance parameters. This could be due to a faulty sensor, wiring issues, or other related problems.
• ABS warning light on the dashboard
• Brakes may feel different or unresponsive
• Reduced braking performance
• Faulty brake pressure sensor
• Wiring issues or poor connections
• Faulty brake control module
OBD-II: On-Board Diagnostics, a standardized system for vehicle self-diagnosis.
ABS: Anti-lock Braking System, a safety system that prevents wheels from locking up during braking.
• Use an OBD-II scanner to confirm the code.
• Inspect the brake pressure sensor and its wiring for damage.
• Test the sensor's output with a multimeter.
• Replace the brake pressure sensor if faulty.
• Repair or replace damaged wiring or connectors.
• Replace the brake control module if necessary.
• OBD-II scanner
• Multimeter
• Wrench set
$150 - $400
Moderate
• Chevrolet Silverado
• GMC Sierra
• Cadillac Escalade
• Regularly inspect brake system components.
• Ensure all electrical connections are secure.
• Perform routine maintenance checks.
Sensor Issue
• Do not ignore the ABS warning light.
• Have the brakes checked by a professional.
• Avoid driving in hazardous conditions until fixed.
Check with your vehicle manufacturer for specific warranty coverage on brake components.
This code has been associated with vehicles using electronic brake control systems, especially in models with advanced ABS features.
High – Brake issues can lead to unsafe driving conditions.
Driving with malfunctioning brakes can be dangerous and may violate vehicle safety regulations.
• Vehicle parked on a level surface
• Engine off and ignition in the ON position
The brake pressure sensor is typically located near the master cylinder or integrated into the brake control module.
Q: Can I drive with a C063C code?
A: It's not recommended as it could indicate a serious brake issue.
Q: How do I reset the ABS light?
A: Fix the underlying issue first, then use an OBD-II scanner to clear the code.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.