Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer thinks the brake pedal isn't in the right place when you press it. It's like when your foot doesn't reach the pedal correctly.
The brake pedal position sensor is used to determine the position of the brake pedal. If the sensor's offset exceeds the learning limit, it means the sensor is not aligned correctly or is malfunctioning.
The C061A code is triggered when the brake pedal position sensor 'B' reports an offset value that exceeds the pre-set learning limit. This could be due to a misalignment, sensor failure, or an issue with the calibration of the sensor. The sensor is responsible for sending data to the vehicle's computer about the position of the brake pedal, which is critical for systems like ABS and stability control.
• Brake warning light on the dashboard
• Unresponsive or spongy brake pedal
• ABS or traction control system malfunction
• Misaligned brake pedal position sensor
• Faulty brake pedal position sensor
• Calibration issue with the sensor
OBD-II: On-Board Diagnostics, a standardized system for self-diagnostics in vehicles.
ABS: Anti-lock Braking System, a safety system that prevents wheels from locking up during braking.
• Check for any visible damage or misalignment of the brake pedal position sensor.
• Use a diagnostic tool to read the sensor data and compare it to specifications.
• Perform a calibration procedure for the sensor if necessary.
• Realign the brake pedal position sensor.
• Replace the faulty brake pedal position sensor.
• Recalibrate the sensor using a diagnostic tool.
• OBD-II scanner
• Multimeter
• Wrench set
$100 - $300
Moderate
• Chevrolet Silverado
• GMC Sierra
• Cadillac Escalade
• Regularly inspect the brake system for wear and tear.
• Ensure proper alignment of sensors during maintenance.
• Perform routine diagnostic checks.
Sensor Issue
• Have your vehicle inspected by a professional if you notice any braking issues.
• Do not ignore warning lights on the dashboard.
Check with your vehicle manufacturer for warranty coverage on brake system components.
This code has been associated with vehicles that have electronic brake control systems and is often seen in models with advanced safety features.
High – This issue can affect braking performance and should be addressed immediately.
Driving with a malfunctioning brake system can be dangerous. Ensure repairs are completed by a qualified technician.
• Vehicle parked on a level surface
• Ignition in the 'on' position without starting the engine
The brake pedal position sensor is typically located near the brake pedal assembly under the dashboard.
Q: Can I drive with a C061A code?
A: It is not recommended to drive with this code, as it can affect your vehicle's braking performance.
Q: How do I reset the brake pedal position sensor?
A: Resetting typically requires a diagnostic tool to recalibrate the sensor. Consult a professional mechanic.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.