Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the car's computer noticed a problem with one of the sensors that checks how hard you are pressing the brake pedal. Sometimes it works, and sometimes it doesn't, like when a light bulb flickers on and off.
The brake pressure sensor B is sending signals that are not consistent. This can affect the braking system's performance.
The C056C code indicates that the brake pressure sensor B is providing intermittent or erratic signals to the vehicle's control module. This can lead to incorrect readings of brake pressure, potentially affecting the vehicle's braking system performance.
• ABS warning light on
• Inconsistent brake pedal feel
• Reduced braking performance
• Faulty brake pressure sensor B
• Damaged or corroded wiring/connectors
• Faulty ABS control module
ABS: Anti-lock Braking System
OBD-II: On-Board Diagnostics, Second Generation
• Perform a visual inspection of the brake pressure sensor and its wiring.
• Check for corrosion or damage in the connectors.
• Use a multimeter to test the sensor's output signal.
• Replace the brake pressure sensor B if faulty.
• Repair or replace damaged wiring or connectors.
• Replace the ABS control module if necessary.
• OBD-II scanner
• Multimeter
• Wrench set
$150 - $400
Moderate
• Chevrolet Silverado
• GMC Sierra
• Cadillac Escalade
• Regularly inspect brake components.
• Ensure connectors are free from corrosion.
• Have regular maintenance checks.
Sensor Issue
• Do not ignore the ABS warning light.
• Have a professional inspect the braking system.
• Avoid driving in unsafe conditions until repaired.
Check with the vehicle manufacturer for specific warranty coverage on brake system components.
This code is commonly reported in vehicles with aging brake systems or in regions with high humidity affecting electrical connections.
High – Affects braking performance, which is critical for vehicle safety.
Driving with a malfunctioning brake system can lead to accidents. Always address brake-related issues promptly.
• Vehicle stationary
• Engine running
The brake pressure sensor is typically located near the brake master cylinder or within the ABS module.
Q: Can I drive with the C056C code?
A: It's not recommended as it can affect braking performance. Have it checked as soon as possible.
Q: How can I reset the ABS warning light?
A: Fix the underlying issue first, then use an OBD-II scanner to clear the code.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.