Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the computer in your car is having trouble getting power to the part that helps your car stop safely. It's like when a toy doesn't work because the batteries aren't connected properly.
The ABS (Anti-lock Braking System) uses valves to control the brake pressure. This code indicates that there is an issue with the electrical circuit that supplies power to these valves.
The C053B code is triggered when the ABS control module detects a problem with the supply voltage to the ABS valves. This could be due to an open circuit, meaning that the electrical path is broken, preventing the proper operation of the ABS valves.
• ABS warning light on
• Reduced braking performance
• ABS system not functioning
• Faulty ABS valve
• Damaged wiring or connectors
• Blown fuse
ABS: Anti-lock Braking System
OBD-II: On-Board Diagnostics, second generation
• Check for blown fuses related to the ABS system.
• Inspect wiring and connectors for damage or corrosion.
• Test the ABS valve for proper operation.
• Replace any blown fuses.
• Repair or replace damaged wiring or connectors.
• Replace the faulty ABS valve if necessary.
• Multimeter
• OBD-II scanner
• Basic hand tools
$100 - $300
Moderate
• Chevrolet Silverado
• GMC Sierra
• Cadillac Escalade
• Regularly inspect ABS wiring and connectors.
• Ensure fuses are in good condition.
• Perform routine ABS system checks.
Electrical Circuit Issue
• Have your brakes checked by a professional.
• Do not ignore the ABS warning light.
• Drive carefully until the issue is resolved.
Check vehicle warranty for coverage on ABS components.
This code has been reported in vehicles with electrical issues related to the ABS system, often due to wiring problems.
High – ABS issues can affect braking performance and safety.
Driving with a malfunctioning ABS can be dangerous and may not comply with vehicle safety regulations.
• Vehicle parked on a level surface
• Ignition in the 'on' position
The ABS valves are typically located near the brake master cylinder or within the ABS module, usually in the engine compartment.
Q: Can I drive with the C053B code?
A: It's not recommended to drive with this code, as it indicates a problem with your braking system.
Q: How do I reset the ABS light?
A: After repairs, use an OBD-II scanner to clear the code. If the issue is fixed, the light should stay off.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.