Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
The car's computer is having trouble getting information from the sensor that tells how fast the back wheel is spinning.
The rear wheel speed sensor is responsible for providing data on the speed of the rear wheels to the vehicle's control systems. If there's an issue with the supply, it means the sensor might not be getting the power or signals it needs to function properly.
The C003E code indicates a problem with the electrical supply to the rear wheel speed sensor. This sensor is crucial for systems like ABS and traction control, as it measures the speed of the wheel and sends this data to the vehicle's computer. An interruption in the supply can lead to incorrect readings or no readings at all.
• ABS warning light on
• Traction control warning light on
• Inoperative speedometer
• Faulty wheel speed sensor
• Damaged wiring or connectors
• Blown fuse or faulty relay
ABS: Anti-lock Braking System
OBD-II: On-Board Diagnostics, Second Generation
• Check for any visible damage to the sensor or wiring.
• Use a multimeter to test the sensor's electrical supply.
• Inspect fuses and relays related to the ABS system.
• Replace the faulty wheel speed sensor.
• Repair or replace damaged wiring or connectors.
• Replace blown fuses or faulty relays.
• Multimeter
• OBD-II scanner
• Basic hand tools
$100 - $300
Moderate
• Ford F-150
• Chevrolet Silverado
• Toyota Camry
• Regularly inspect wheel speed sensors and wiring.
• Ensure fuses and relays are in good condition.
• Avoid driving through deep water which can damage sensors.
Sensor Issue
• Do not ignore ABS warning lights.
• Have the vehicle inspected by a professional if unsure.
• Regular maintenance can prevent such issues.
Check with the vehicle manufacturer for specific warranty coverage on sensors.
This code has been reported in vehicles with high mileage or those exposed to harsh environmental conditions.
Moderate – While the vehicle may still be drivable, safety features like ABS may not function properly.
Driving without a functioning ABS system can increase the risk of accidents, especially in adverse conditions.
• Vehicle stationary
• Ignition on, engine off
The rear wheel speed sensor is typically located near the wheel hub or brake rotor at the rear of the vehicle.
Q: Can I drive with a C003E code?
A: While you can drive, it's not recommended as safety systems like ABS may not work properly.
Q: How do I reset the ABS light?
A: Fix the underlying issue first, then use an OBD-II scanner to clear the code.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.