Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means there's a problem with the car's system that controls the right front brake. It's like when a toy's wheel doesn't stop spinning because the brake isn't working right.
The C0014 code indicates an issue with the control of the right front brake inlet valve, which is part of the vehicle's anti-lock braking system (ABS).
The C0014 code is triggered when the ABS module detects a malfunction in the right front inlet valve circuit. This valve controls the hydraulic pressure to the right front brake, ensuring proper braking performance. A fault can lead to reduced braking efficiency or ABS malfunction.
• ABS warning light on
• Reduced braking performance
• Unusual noises from the brakes
• Faulty right front inlet valve
• Damaged wiring or connectors
• Malfunctioning ABS control module
ABS: Anti-lock Braking System, a safety system that prevents the wheels from locking up during braking.
Inlet Valve: A component that controls the flow of brake fluid to the brakes.
• Check for any ABS-related warning lights on the dashboard.
• Inspect the wiring and connectors for damage or corrosion.
• Use a diagnostic scanner to read ABS module data and confirm the fault.
• Replace the faulty right front inlet valve.
• Repair or replace damaged wiring or connectors.
• Reprogram or replace the ABS control module if necessary.
• OBD-II scanner
• Multimeter
• Brake system tools
$200 - $600
Moderate
• Chevrolet Malibu
• Ford F-150
• Toyota Camry
• Regularly inspect brake system components.
• Ensure ABS sensors are clean and functioning.
• Perform routine maintenance on the braking system.
Brake System Issue
• Do not ignore the ABS warning light.
• Have the braking system inspected by a professional.
• Avoid hard braking until the issue is resolved.
Check with the vehicle manufacturer for warranty coverage on ABS components.
The C0014 code has been associated with vehicles that have experienced ABS issues due to wear and tear or electrical faults.
High – A malfunctioning ABS can compromise vehicle safety.
Driving with a faulty ABS can increase stopping distances and pose a safety risk. Address the issue promptly.
• Vehicle must be on a level surface.
• Ensure the ignition is in the 'on' position without starting the engine.
The right front inlet valve is located near the right front wheel, integrated into the brake system.
Q: Can I drive with a C0014 code?
A: It's not recommended to drive with this code, as it can affect braking performance and safety.
Q: How can I reset the ABS light?
A: Fix the underlying issue first, then use an OBD-II scanner to clear the code and reset the light.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Chassis and ABS faults usually need a scanner that can read brake-system data directly.
View on Amazon
Universal · Torque wrench
Useful when reassembly torque matters for wheel, suspension, and under-hood fasteners.
Useful when wheel, hub, or suspension hardware needs correct reassembly torque.
View on Amazon
Universal · Drive-on ramps
Helpful for safer access underneath the vehicle during exhaust, EVAP, and underbody inspection work.
Helpful for safer access during underbody inspection work.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.