Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means that the little sprayer that cleans the camera on your car isn't working right.
The code B010F indicates a malfunction in the system that controls the washer fluid sprayer for the vehicle's camera. This system is responsible for keeping the camera lens clean so that it can provide a clear view.
The B010F code is set when the vehicle's control module detects an issue with the camera washer actuator, which is responsible for spraying washer fluid onto the camera lens. This could be due to an electrical fault, a blockage in the washer fluid line, or a mechanical failure of the actuator itself.
• Camera view is obscured or dirty
• Warning light on the dashboard
• Washer fluid not spraying on the camera
• Faulty camera washer actuator
• Electrical wiring issue
• Blockage in washer fluid line
Actuator: A device that causes a mechanism to operate.
Washer Fluid: A liquid used to clean the windshield and other parts of the vehicle.
• Check for any obstructions in the washer fluid line.
• Inspect the wiring and connections to the camera washer actuator.
• Test the actuator for proper operation.
• Clear any blockages in the washer fluid line.
• Repair or replace damaged wiring.
• Replace the faulty camera washer actuator.
• Multimeter
• Wrench set
• Diagnostic scanner
$50 - $200
Moderate
• Vehicle 1
• Vehicle 2
• Vehicle 3
• Regularly check and clean the camera lens.
• Ensure washer fluid levels are maintained.
• Inspect wiring for wear and tear periodically.
Sensor Issue
• Clean the camera lens regularly to prevent dirt buildup.
• Check washer fluid levels frequently.
Check with your vehicle manufacturer; some components might be covered under warranty.
This code has been associated with vehicles equipped with camera cleaning systems, which have become more common in recent years.
Low – This issue does not affect vehicle drivability but may impair camera visibility.
Ensure the camera is clean for safe driving and to comply with vehicle safety standards.
• Ensure the vehicle is in a safe, stationary position.
• Verify that the washer fluid reservoir is full.
The camera washer actuator is typically located near the camera, often at the rear of the vehicle or near the rearview mirror.
Q: What happens if I ignore this code?
A: Ignoring this code may result in poor camera visibility, which could affect safety features that rely on the camera.
Q: Can I fix this issue myself?
A: If you are comfortable with basic car maintenance, you might be able to clear blockages or check wiring, but replacing the actuator may require professional help.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Body and airbag faults often need a scanner that can access more than generic powertrain codes.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking power, ground, and continuity in body-system circuits.
View on Amazon
Universal · Fuse kit
Useful for electrical diagnosis when blown fuses or circuit faults are part of the troubleshooting process.
Useful when body electrical faults trace back to blown fuses or shared circuits.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.