Easy one-page printout for the garage or repair shop
This summary uses the existing diagnostic information shown in full below.
This code means there's a problem with the part of the car that helps clean the sensor that helps it 'see' things around it.
The B0106 code indicates an issue with the actuator responsible for operating the washer system for the LIDAR sensor, which is used for detecting objects around the vehicle.
The LIDAR Washer Actuator A is responsible for cleaning the LIDAR sensor by spraying washer fluid. If this actuator fails, the sensor may not be cleaned properly, potentially affecting the sensor's ability to detect objects accurately.
• LIDAR sensor not cleaning properly
• Warning light on the dashboard
• Reduced sensor accuracy
• Faulty LIDAR washer actuator
• Damaged wiring or connectors
• Blown fuse in the washer system
LIDAR: Light Detection and Ranging, a method for measuring distances by illuminating the target with laser light.
Actuator: A component of a machine that is responsible for moving or controlling a mechanism or system.
• Check for any visible damage to the actuator.
• Inspect wiring and connectors for any signs of damage or corrosion.
• Test the actuator with a multimeter to ensure it is receiving power.
• Replace the faulty actuator.
• Repair or replace damaged wiring or connectors.
• Replace any blown fuses in the washer system.
• Multimeter
• Screwdriver set
• Socket set
$100 - $300
Moderate
• Vehicle 1
• Vehicle 2
• Vehicle 3
• Regularly check the washer fluid level.
• Inspect the actuator and wiring for signs of wear.
• Ensure the LIDAR sensor is cleaned regularly.
Sensor Issue
• Have the vehicle inspected by a professional if the warning light appears.
• Ensure regular maintenance of the vehicle's sensor systems.
Check with the vehicle manufacturer for warranty coverage on sensor-related components.
This code has become more common with the increased use of LIDAR systems in modern vehicles.
Moderate – While the vehicle may still operate, sensor accuracy could be compromised, affecting safety features.
Driving with impaired sensor systems may affect the vehicle's safety features. Address the issue promptly.
• Vehicle parked with ignition on.
• Access to the LIDAR sensor and washer system.
The LIDAR washer actuator is typically located near the LIDAR sensor, often at the front of the vehicle.
Q: What does the LIDAR washer actuator do?
A: It sprays washer fluid to clean the LIDAR sensor.
Q: Can I drive with a B0106 code?
A: While you can drive, sensor accuracy may be affected, impacting safety features.
Pro · Four-system diagnostics
A handheld scanner aimed at engine, transmission, ABS, and airbag diagnostic work.
Body and airbag faults often need a scanner that can access more than generic powertrain codes.
View on Amazon
Universal · Digital multimeter
A solid entry-level multimeter for voltage, continuity, resistance, and basic electrical troubleshooting.
Helpful for checking power, ground, and continuity in body-system circuits.
View on Amazon
Universal · Fuse kit
Useful for electrical diagnosis when blown fuses or circuit faults are part of the troubleshooting process.
Useful when body electrical faults trace back to blown fuses or shared circuits.
View on AmazonThese are optional diagnostic tools, not guaranteed fixes. As an Amazon Associate I earn from qualifying purchases.